Summary: Use this method to make your SSD visible if it isn’t visible in Windows File Explorer or Disk Management, whether it’s new or old. You can get Webbyacad data recovery tool for free if your SSD removed fixes quick solutions. Windows 11/10/8/7 suddenly refuses to identify the associated Samsung, WD, or Plextor SSD, or the newly installed M.2 SSD. What’s the problem?
How do I Fix it so that my Computer’s SSD (solid-state drive Shows Up?
The following are the most common reasons why your SSD removed fixes quick solutions, Disk Management, Device Manager, or BIOS:
- Your new SSD has not been initialized.
- Your SSD has no internet access.
- Your SSD has no drive letter allocated to it.
- File system issues with your SSD.
- An SSD driver upgrade is necessary.
- Connection problems.
- Hardware issues.
1: The SSD was not Identified since it was not Setup.
The most common reason for a recently acquired SSD not appearing in Windows Explorer is that it has not been started. A new SSD removed fixes quick solutions can only be seen and utilized in File.
In any event, you can use Windows Disk Management to initialize, partition, and format your SSD to make it visible again in Windows. This procedure is identical to that used to initialize, create a new basic volume for, and format an external hard disk.
- Set the initialization of the uninitialized disk.
- To initialize an SSD on Windows, perform the following:
- Right-click the uninitialized SSD in Disk Management and select Initialize Disk.
- Select which disk to initialize in the Initialize Disk box.
- You can also choose between GPT (Guide Partition Table) and MBR (Master Boot Record) as the partition style.
2: SSD not showing up due to drive letter problems
If the drive letter is either missing or the same as that of another disk, the Windows operating system will not recognize the SSD.
- In the absence of a disk drive letter
- To remedy this issue, assign a new drive letter to the SSD.
- Start the disk management software.
- By right-clicking the SSD partition, you may change the Drive Letter and Paths.
- By selecting Change: make a drive letter option, you can select Assign the following drive letter. After that, click OK to confirm.
SSD does not appear due to ‘RAW’, ‘Unknown’, or ‘incorrect capacity’.
If your SSD’s file system is faulty or incompatible with Windows, it will not appear in File Explorer; instead, it will be labeled in Disk Management with an error warning such as RAW, Unknown, (or may display an incorrect capacity).
Most SSDs can be accessed in Windows by reformatting them on a suitable PC. However, reformatting the SSD removed fixes quick solutions on it. If you need the files on the disk, you can use Webbyacad data recovery tool for Windows to recover them before formatting the drive.
How to do it is as follows:
- Step 1: On your computer, download, install, and launch Webbyacad data recovery tool.
- Step 2: Click Scan after choosing a recovery module from among your SSD partitions.
- Step 3: Select the files you want after viewing the scanning results.
- Step 4: To recover the deleted files, click Recover.
You can reformat your SSD once you’ve recovered the lost data:
- In Disk Management, right-click the SSD and select Format.
- Select a file system such as exFAT or NTFS. Next, make sure you execute a fast format.
- SSD fast format in Windows
- The SSD is displayed as “Unallocated” space, so it is not visible.
- The reason your SSD is showing “Unallocated” space is that it has no volume.
To get the SSD to appear and function normally in Windows again, you can assign it at least a volume.
- On your SSD, right-click the empty space and choose New Simple Volume > Next.
- Give the unallocated SSD a volume.
- You can either accept the default volume size or enter the desired volume size in MB. Next, choose that option.
- Click Next after selecting a drive letter.
- Proceed > Complete to format the volume using the default options.
The cases are below of Removed Fixes Quick Solutions
Case 1: SSD not visible due to its offline status
The SSD will not appear in My Computer if it displays as “Offline” in Disk Management. You simply need to bring the SSD back online in order to make it visible to Windows once more.
SSD accessible online in Disk Management
Case 2: SSD not visible due to driver problems
A driver is a piece of software that facilitates communication between an operating system and a device, such as an SSD. In the event that your SSD is not visible in Disk Management, driver issues may be the cause.
- Therefore, it is suggested that you check using the Device Manager.
- To access the Computer Management panel, right-click “This Computer” and select “Manage.”
- Next, choose “Device Manager” from the sidebar on the left.
Generally, Device Manager’s Other devices section will display your SSD if there is a driver problem. Additionally, it shows the label “Unknown device” or a “!” sign.
- Proceed to resolve the SSD driver issue so that Windows can see it.
- After you right-click the SSD and select Uninstall, restart your computer.
- If the SSD is not listed under “Disk drives” in Device Manager, try right-clicking it once again.
- Choose Update Software for Drivers. Look for driver software updates on its own.
- SSD driver update using Device Manager
Case 3: SSD not detected because BIOS has disabled it
Regretfully, your SSD can be disabled in BIOS (or UEFI, an upgrade of BIOS) if it isn’t visible in Device Manager either (and it’s not because you have hidden it manually). If you want it to appear in Windows 11/10/8/7, you can re-enable it in the BIOS.
How to Get the BIOS to Enable SSD Settings Again.
To access the BIOS Setup Utility, restart your computer while simultaneously pressing the BIOS key (mentioned below).
- Turn on your SSD port or set it to Enabled in BIOS Setup
- If it is currently switched off or displays Disabled.
- Give your machine a restart.
- The producers of popular PC models have programmed.
What should you do if your SSD is not shown in the BIOS?
If your SSD removed fixes quick solutions are not identified by BIOS, they may not be properly attached to your computer or may have already been destroyed.
The steps outlined below can be utilized to conduct a thorough examination.
- Examine the SSD’s interface.
- In terms of an external SSD:
- Replace the USB connector on the external SSD.
- If the external SSD is still not recognized, try inserting it into a separate USB port to see if the USB port is broken.
In Terms of an Internal SSD:
Check to see what kind of SSD you have. If you have an M.2 SSD, check to see if your motherboard’s interface supports it. If it is not an M.2 SSD, continue.
- Reconnect the internal SSD to the motherboard’s interface, which is usually the SATA interface.
- Check the data cord.
- Replace the data cable for the internal SSD or the USB cable for the external SSD to ensure proper operation.
- If it’s an internal SSD, you should get a professional to inspect and replace the data cable.
- Connect the SSD USB cord to the PC port.
- Send the SSD to a repair shop.
- If the SSD is still not visible after analyzing and fixing any interface or data cable issues.
- You should consider whether it has a physical problem and consider having it fixed.
Final Observations
SSD removed fixes quick solutions is a common and challenging issue. I hope this essay has given you a thorough understanding of the reasons why SSDs do not display in Windows, as well as detailed solutions to these problems.
If you do unintentionally lose SSD data when repairing it, you may quickly recover the erased files by utilizing the Webbyacad data recovery tool application.
Read some more blogs:
Fix the Error and Format the Disk in Drive Before you Utilizing it
[…] SSD Removed Fixes Quick Solutions […]